Getting to the Bottom of the cLG Error on your Samsung Dryer

Are you dealing with a cLG error code on your Samsung dryer and not sure what to do? Many households across the world rely on Samsung dryers to keep their clothes dry and smelling fresh - so it can be a bit of a letdown when a malfunction occurs! But don’t worry, this guide will walk you through the steps necessary to troubleshoot the cLG error code, so you can get your dryer back up and running again sooner rather than later.

First things first - it’s important to know what the cLG error code signifies. This error indicates a problem with the dryer’s main control board. This means you might need to replace the main control board to shift the error. However, it’s possible that the control board isn’t the source of the problem, so it’s important to take a few extra steps to ensure that is the actual cause.

Start by unplugging the dryer and checking the wiring connections to the control board. Visually inspect each wire to make sure no wires are loose or disconnected. Additionally, you can check for any electrical shorts or burn marks around the connections. If all the connections check out, you’ll want to move on to testing components. You can start with the thermistor, which is a temperature sensor responsible for controlling the dryer’s heat levels. If the thermistor is faulty, you may need to replace it to shift the error code.

Finally, if all components check out and the wiring connections are clear, you may need to replace the main control board altogether. This can be a difficult repair, so it’s recommended that you consult with a professional - especially if you’re not familiar with home appliance repair.

No matter the cause, you’ll need to get to the bottom of the cLG error code on your Samsung dryer to prevent additional damage and repair costs. To help make this process easier, it’s important to familiarize yourself with the possible causes of the error code and know the necessary steps to troubleshoot it. If you haven’t already, be sure to check out our Comprehensive Appliance Error Codes Glossary. This resource will help you become more familiar with your dryer’s error codes and provide some troubleshooting steps so you can feel confident when dealing with a malfunction like this again in the future.

Troubleshooting the cLG Error Code on a Samsung Dryer

FAQs

  1. What does the cLG error code mean on my Samsung Dryer? The cLG error code indicates a problem with the moisture sensor on your Samsung dryer.

  2. How can I reset the cLG Error code on my Samsung dryer? Before attempting to reset the error code, unplug the dryer and check your lint filter and venting system to make sure they are clean. If they are not, then clean them and plug the dryer back in. If the problem still persists, then you can reset the code by pressing and holding the start and cancel buttons simultaneously for 3 seconds.

  3. What causes a cLG Error code on my Samsung dryer? The cLG error code is typically caused by an obstruction in the lint filter, venting system, or evaporator sensor.

  4. How can I prevent a cLG Error from occurring on my Samsung dryer? In order to prevent the cLG error from occurring, make sure to clean the lint filter and venting system regularly. It is also important to check the evaporator sensor for any obstructions.

  5. What other steps can I take to troubleshoot a cLG error on my Samsung dryer? Other steps you can take to troubleshoot the cLG error include checking the wiring and connections of the evaporator sensor, checking the control board for any damage, and replacing the evaporator sensor if needed.