Troubleshooting Maytag Washer Error Code f37
If your Maytag washing machine has an error code of f37 then it could be indicating that an issue has occurred on the machine and it needs to be addressed. When troubleshooting this error code, it is important to understand what could be causing it, how to test for it, and what the solutions may be, in order to get your washer up and running again.
Before starting any repairs, it is important to unplug the washer and remove any panels or covers to access components like the circuit board and sensors. Any errors related to the machine’s main control board or faulty wiring should be addressed first as these are common causes of the f37 error code. Examine the wiring and connectors to see if there are any loose or damaged connections. If the wiring appears to be fine, then you will need to check if the main control board is having any problems. Be sure to use a multimeter to test for voltage and current readings to ensure the board is functioning correctly.
If the problem is with the control board then it is likely that a replacement is needed. Replacement boards can be purchased from authorized Maytag repair outlets and installed to get your washer back up and running. Once the board is installed correctly, the error code should reset and the machine should start working again.
If the error code is still present after inspecting and replacing the main control board, then it is possible that the pressure switch has a problem or isn’t functioning correctly. This will determine the water level and can affect the overall operation of the washer. Using a multimeter to test it is a good idea to determine if the pressure switch is in working order. If not, it will need to be replaced in order to allow the washer to cycle properly.
In any case, if the error code persists even after following the troubleshooting steps outlined above, it is highly recommended that you contact a professional appliance repair technician. They can help to diagnose and repair any other possible issues which may be causing the f37 error code on your Maytag washer.
Troubleshooting the f37 error code on a Maytag washer can be tricky, but with the right guidance and help from a professional technician if needed, the issue should be resolved in no time.
Take proper precautions and stay safe while attempting to diagnose and fix the washer. If you feel this a task you may not be ready to tackle, don’t hesitate to enlist the help of an experienced appliance repair technician by using our Directory of Appliance Repair Technicians.
Troubleshooting f37 Error Code on Maytag Washer
- What is the f37 error code?
The f37 error code is an indication that the control board on the Maytag washer is failing to communicate with the motor.
- How do I know when the f37 error code appears?
When the f37 error code appears during a washing cycle, the washing machine will stop operating and the control board will display a blinking flashing light.
- What should I do when the f37 error code appears?
If the f37 error code appears, the first thing to do is to unplug the washer from its electrical source or turn the breaker off for about 3-4 minutes. Then plug the washer back in, and restart the washing cycle to see if the error code returns.
- What is the cause of the f37 error code?
The cause of the f37 error code is likely due to a faulty wire connection or a defective control board.
- How can I fix the f37 error code?
To fix the f37 error code, the first step is to check the wiring harness connections. If the wiring is properly connected, the control board could need to be replaced. It’s recommended to contact an appliance technician for help with this repair.
Key Takeaways
- Unplug the washer and check the wiring and main control board for any issues when troubleshooting a f37 error code on Maytag washer.
- If the main control board is not functioning correctly, replace it with a new board from an authorized repair outlet.
- Check if the pressure switch is causing the issues and replace it if necessary.
- If attempts at fixing the error code are unsuccessful, contact a professional appliance repair technician for help.
- Always use proper safety precautions when troubleshooting a washing machine.