FH

Kitchenaid

No water detected entering the machine or the pressure switch was not detected.

Washing Machine

F02

Kitchenaid

A long drain time has been detected.

Washing Machine

F05

Kitchenaid

There is an error with the water temperature sensor.

Washing Machine

F06

Kitchenaid

An error with the drive motor tachometer has been detected.

Washing Machine

F07

Kitchenaid

There is an error with the motor control unit.

Washing Machine

F09

Kitchenaid

An overflow condition has been detected.

Washing Machine

F10

Kitchenaid

The motor control unit's heat sink has tripped due to overheating.

Washing Machine

F11

Kitchenaid

A serial communication error has occurred.

Washing Machine

F13

Kitchenaid

An error has been detected in the dispenser circuit.

Washing Machine

F14

Kitchenaid

An error with the EEPROM has been detected.

Washing Machine

F15

Kitchenaid

An error with the motor control unit has been detected.

Washing Machine

F21 or F22

Kitchenaid

An error has been detected in the CCU, Touchpad, or LED assembly.

Washing Machine

FdU

Kitchenaid

A door unlock error has been detected.

Washing Machine

FdL

Kitchenaid

A door lock error has been detected.

Washing Machine

Sud

Kitchenaid

A suds lock has been detected, meaning there was an overdose of detergent during the wash cycle.

Washing Machine

PF

Kitchenaid

Power failure - this means the dryer stopped working due to a power failure. Press Start to continue or press Pause/Cancel to stop it.

Dryer

E1

Kitchenaid

Temperature sensor open - this means the temperature sensing circuit is open and the temperature sensor needs to be replaced if faulty.

Dryer

E2

Kitchenaid

Temperature sensor shorted - this means the temperature sensing circuit is shorted and the temperature sensor needs to be replaced if faulty.

Dryer

E3

Kitchenaid

Blower rotation failure - if the blower rotation speed drops below 500 rpms, all outputs will be turned off and error code E3 will be displayed.

Dryer

E4

Kitchenaid

Tumbler rotation failure - if the tumbler rotation speed drops to 0, all outputs will be turned off and error code E4 will be displayed.

Dryer

E5

Kitchenaid

Dry rack sensor - if during a Dry Rack cycle the signal is lost, all outputs are turned off and error code E5 is displayed.

Dryer

E6

Kitchenaid

Exhaust high limit fault - if the exhaust temperature goes above 87.7C (190F) all outputs will turn off and error code E6 will be displayed.

Dryer

F1/E0

Kitchenaid

User interface has failed, you need to disconnect electrical power from the oven and replace the user interface.

Oven

F1/E1

Kitchenaid

Electronic oven control board has failed.

Oven

F2/E0

Kitchenaid

The user interface won't respond.

Oven

F2/E1

Kitchenaid

There's a defective button on the user interface.

Oven

F3/E0

Kitchenaid

The upper oven temperature sensor is defective.

Oven

F3/E1

Kitchenaid

The lower oven temperature sensor is defective.

Oven

F3/E3

Kitchenaid

The meat probe is defective.

Oven

F5/E0

Kitchenaid

The oven door switch and oven door lock switch don't agree.

Oven

F5/E1

Kitchenaid

The oven door lock assembly doesn't work.

Oven

F6/E0

KitchenAid

There's no communication between the user interface and the electronic oven control board.

Oven

F6/E1

KitchenAid

The oven is too hot when baking or broiling.

Oven

F6/E2

KitchenAid

The oven is too hot when in clean mode.

Oven

F6/E4

KitchenAid

The user interface and electronic oven control board are not matched.

Oven

F6/E5

KitchenAid

The electronic control board was programmed incorrectly.

Oven

F1-E0 to F1-E9

Kitchenaid

There is a problem with the control board (clock) that needs to be replaced or checked.

Stove

F2-E0 to F2-E6

Kitchenaid

There is a problem with the touchpad (keypad) that needs to be replaced or checked.

Stove

F3-E0 and F3-E3

Kitchenaid

There is an issue with the oven temperature sensor (RTD) that needs to be replaced.

Stove

F4-E1

Kitchenaid

There is a defect in the meat probe that needs to be replaced.

Stove

F5-E Codes

Kitchenaid

There is a problem with the door switch that needs to be replaced or checked.

Stove

F6-E0

Kitchenaid

There is an issue with the return line that needs to be replaced.

Stove

F7-E1

Kitchenaid

There is a problem with the common switch wire that needs to be checked and fixed.

Stove

2 Digit Failure Codes (F0 to F9)

Kitchenaid Stove

There is a control board failure or oven door lock failure that needs to be checked and replaced.

Stove/Oven

F1E4

Kitchenaid Microwave

Control board failure.

F2E0/F2E1

Kitchenaid Microwave

Touchpad not connected to control board (clock).

F2E3

Kitchenaid Microwave

Touchpad is either shorted or a key is held down for too long.

Err1

Kitchenaid

The coffee maker may display this error if it is near an outside wall in a cold climate or if the water is quite cold.

Coffee Maker

Err2

Kitchenaid

An electrical component has been dislocated within the coffee maker.

Coffee Maker

Err4

Kitchenaid

The coffee maker may have a stuck button.

Coffee Maker

KitchenAid Appliance Error Codes FAQ

What is a KitchenAid appliance error code?

> A KitchenAid appliance error code is a series of letters or numbers displayed on your KitchenAid appliance, indicating a specific problem or issue with the machine.

Why is it important to know about KitchenAid appliance error codes?

> Understanding KitchenAid appliance error codes can help you quickly diagnose and resolve problems with your KitchenAid appliance, saving you time and money in the process.

How can I find the error code for my KitchenAid appliance?

> The error code for your KitchenAid appliance may be displayed on the machine itself, in the owner's manual, or you can search for it in our directory of KitchenAid appliance error codes.

What does the error code mean and how can I fix the problem?

> The meaning of the error code and how to resolve the issue can be found in our directory of KitchenAid appliance error codes. Simply search for the code and find a brief and easy-to-understand description of the problem and its solution.

Need Help with Your Appliance?

If you're having trouble resolving an error code, or if you'd rather leave the repairs to the experts, our directory of appliance repair technicians is here to help. Find a trusted professional near you to get your appliance back in working order.

Find a Technician