F1
Fisher and PaykelMotor Controller Module Fault - An error has occurred in the Motor Controller Module.
Washing Machine
F2
Fisher and PaykelPressure Sensor Fault - An error was encountered when trying to read the pressure sensor.
Washing Machine
F3
Fisher and PaykelMotor Controller Module Fault - The Motor Controller Module has recorded a memory error.
Washing Machine
F4
Fisher and PaykelCommunications Fault - The Display Module has had difficulty communicating with the Motor Controller.
Washing Machine
F5
Fisher and PaykelCommunications Fault - The Motor Controller has had trouble communicating with the Display Module.
Washing Machine
F6
Fisher and PaykelMotor Controller Module Fault - The Motor Controller Module received an incorrect signal from the pressure sensor.
Washing Machine
F6
Fisher and PaykelMotor Controller Module Fault - The Motor Controller module has received an incorrect signal from the pressure sensor.
Washing Machine
F7
Fisher and PaykelDisplay Module Fault - The Display module has found a memory fault.
Washing Machine
F8
Fisher and PaykelDisplay Module Fault - The Display micro has not been able to start up correctly.
Washing Machine
F9
Fisher and PaykelMachine Size Fault - The Display size switch setting does not match that stored in the memory.
Washing Machine
F10
Fisher and PaykelTemperature Sensor Fault - The temperature sensor may be open circuit or the ambient temperature is below minus 10oC.
Washing Machine
F11
Fisher and PaykelPressure Sensor Fault - The Motor Controller micro has detected a negative pressure when trying to measure the water level.
Washing Machine
F12
Fisher and PaykelOverfill Fault - The Motor Controller module has found the water level to be above the flood level and tried to pump the excess water out.
Washing Machine
F13
Fisher and PaykelPump Fault - The Display module has detected that the pump is on when it should be off.
Washing Machine
F14
Fisher and PaykelPump Connection Fault - The Display Module has detected that the pump is not on when it should be.
Washing Machine
F15
Fisher and PaykelDisplay Module Fault - The Display Module has read an incorrect voltage on the pump circuit.
Washing Machine
F17-F23
Fisher and PaykelDisplay/Motor Controller out of Sequence - The Display Module has read an incorrect voltage on the pump circuit.
Washing Machine
F25
Fisher and PaykelDisplay Module Fault - The Intuitive Display has detected a problem with the LCD.
Washing Machine
F28-F30
Fisher and PaykelDisplay/Motor Controller out of Sequence - Same as fault 17.
Washing Machine
F32
Fisher and PaykelPump Circuit Fault - The Display Module has detected that the pump is on when it is off.
Washing Machine
F33
Fisher and PaykelWater Valve Fault - The Module has detected a water valve fault.
Washing Machine
F34
Fisher and PaykelBrake Resistor Fault - The circuit that controls the braking of the motor is faulty.
Washing Machine
F35
Fisher and PaykelDisplay Module Fault - The Display Module has sent a false signal to the Motor Controller.
Washing Machine
F36
Fisher and PaykelWater Loss Fault - The Motor Controller module has needed to top up the water level too many times during agitation.
Washing Machine
F37
Fisher and PaykelDrain Pump Fault - The water has not drained from the drum.
Washing Machine
F38
Fisher and PaykelPressure Sensor Fault - The Motor Controller module has recorded a water level of empty while agitating.
Washing Machine
F39
Fisher and PaykelTemperature Tube Fault - The pressure tube has become blocked or kinked or has fallen off.
Washing Machine
F40
Fisher and PaykelBowl Dis-engage Fault - The Motor Controller module has found that the bowl is not engaged even though the pressure sensor indicates it's empty.
Washing Machine
F41
Fisher and PaykelTemperature Sensor Fault - The temperature sensor is measuring temperatures above 110°C, the fault is probably due to a short circuit in the sensor line.
Washing Machine
F42
Fisher and PaykelRotor Fault - The Motor Controller has had confusing information feedback.
Washing Machine
Err2 or E2
Fisher and PaykelDrain Pump Failure
All Models
Err3 or E3
Fisher and PaykelNTC1 Error (Exhaust Thermistor Error)
DE7060M1, DE5060M1, DE4060M1, DE8060P2
Err4 or E4
Fisher and PaykelHeater or Sensor Faulty
All Models
Err6 or E6
Fisher and PaykelLint Filters Blocked
All Models
Err9 or E9
Fisher and PaykelNTC2 Error (Heater Thermistor Error)
DE7060M1, DE5060M1, DE4060M1, DE8060P2
E32
Fisher and PaykelNTC2 is Out of Range
DH8060C1
E33
Fisher and PaykelNTC3 is Out of Range
DH8060C1
E70
Fisher and PaykelVoltage to Drum Motor is Incorrect
DH8060C1
E32
Fisher and PaykelThe second thermistor is out of range.
Dryer
E71
Fisher and PaykelThe dryer is overloaded.
Dryer
E72
Fisher and PaykelThere is a communication error between the motor and PCB.
Dryer
LO
Fisher and PaykelThe ambient temperature is too low.
Dryer
Keyloc
Fisher and PaykelThe keylock is activated.
Dryer
Door open
Fisher and PaykelThe door is not closed.
Dryer
Paus
Fisher and PaykelThe dryer is paused.
Dryer
Cln Lint
Fisher and PaykelThe lint filter is blocked or full.
Dryer
H20 full
Fisher and PaykelThe water tank is full.
Dryer
CLN cond
Fisher and PaykelThe condenser needs cleaning.
All models
F1
Fisher and Paykel OvenAmbient temperature exceeds 85C.
Oven
F2
Fisher and Paykel OvenOven capacity temperature too high during pyrolytic cleaning cycle.
Oven
F3
Fisher and Paykel OvenOven cavity temperature has exceeded 305C.
Oven
F4
Fisher and Paykel OvenPower module failure.
Oven
F5
Fisher and Paykel OvenCommunication error between oven clock and oven power module.
Oven
F7
Fisher and Paykel OvenOven door lock fault detected.
Oven
A1
Fisher and Paykel OvenCCS did not reset.
Oven
C1
Fisher and Paykel OvenOven temperature exceeds 305C.
Oven
Erxx or Ex
Fisher and PaykelError message displayed or screen not operative.
Stove
E2 or EH
Fisher and PaykelIndicates an overheating of the cooking zone/s.
Stove
E6
Fisher and PaykelThe cooker has been incorrectly connected.
Stove
Fisher & Paykel Appliance Error Codes FAQ
What is a Fisher & Paykel appliance error code?
> A Fisher & Paykel appliance error code is a series of letters or numbers displayed on your Fisher & Paykel appliance, indicating a specific problem or issue with the machine.Why is it important to know about Fisher & Paykel appliance error codes?
> Understanding Fisher & Paykel appliance error codes can help you quickly diagnose and resolve problems with your Fisher & Paykel appliance, saving you time and money in the process.How can I find the error code for my Fisher & Paykel appliance?
> The error code for your Fisher & Paykel appliance may be displayed on the machine itself, in the owner's manual, or you can search for it in our directory of Fisher & Paykel appliance error codes.What does the error code mean and how can I fix the problem?
> The meaning of the error code and how to resolve the issue can be found in our directory of Fisher & Paykel appliance error codes. Simply search for the code and find a brief and easy-to-understand description of the problem and its solution.Need Help with Your Appliance?
If you're having trouble resolving an error code, or if you'd rather leave the repairs to the experts, our directory of appliance repair technicians is here to help. Find a trusted professional near you to get your appliance back in working order.
Find a Technician- Appliance Error Codes
- Fisher & Paykel Appliance Error Codes
- Fisher & Paykel Washing Machine Error Codes
- Fisher & Paykel Dryer Error Codes
- Fisher & Paykel Oven Error Codes
- Fisher & Paykel Stove Error Codes
- Fisher & Paykel Microwave Error Codes
- Fisher & Paykel Coffee Machine Error Codes
- Fisher & Paykel Dishwasher Error Codes
- Fisher & Paykel Fridge Error Codes