E10

Electrolux

Water Inlet Fault - Ensure the taps are turned on and hoses aren't kinked or blocked. If not, replace the water inlet valve.

Washing Machine

E11

Electrolux

Washing Phase Fill Error - Ensure tap is turned on and check hoses for kinks and blockages. Replace water inlet valve if needed.

Washing Machine

E12

Electrolux

Rinsing Phase Fill Error - Ensure tap is turned on and check hoses for kinks and blockages. Replace water inlet valve if needed.

Washing Machine

E13

Electrolux

Water Level Drop Error - Check drain hose position, check hoses for leaks. Replace pressure sensor if needed.

Washing Machine

E20

Electrolux

Drain Fault - Check drain hoses and filter for blockages. Replace drain pump if needed.

Washing Machine

E21

Electrolux

Drain Fault - Check drain hoses and filter for blockages or damage. Replace drain pump if needed.

Washing Machine

E22

Electrolux

Rinse Drain Error - Check drain hoses and filter for blockages. Replace drain pump if needed.

Washing Machine

E23

Electrolux

Drain Pump Triac Sensing Error - Check drain pump and wiring. Replace main PCB if needed.

Washing Machine

E24

Electrolux

Drain Pump Triac Sensing Circuit Fault - The main PCB needs to be replaced to solve this issue.

Washing Machine

E25

Electrolux

Wrong Input Signal to Microprocessor - Replace the PCB to solve this issue.

Washing Machine

E31

Electrolux

Pressure Switch Fault - Replace the pressure switch or the main PCB to solve this issue.

Washing Machine

E32

Electrolux

Pressure Switch Calibration Problem - Inspect wiring, hoses, inlet valve, and drain pump to solve this issue.

Washing Machine

E35

Electrolux

Pressure Sensor Fault - Check water inlet valve and pressure chamber, replace pressure sensor and/or main PCB if needed.

Washing Machine

E35

Electrolux

Pressure sensor detected high water level, check water inlet valve and pressure chamber, replace pressure sensor/main PCB if needed.

Washing Machine

E40-E45

Electrolux

Door lock issue, ensure door is closed properly, check wiring and lock, replace door lock or main PCB if needed.

Washing Machine

E50

Electrolux

Motor fault, check electrical plugs and replace motor if needed.

Washing Machine

E60

Electrolux

Heating fault, check temperature sensor and heating element, replace if faulty, replace PCB if both pass test.

Washing Machine

E61

Electrolux

Heating fault, check temperature sensor and heating element, replace if faulty, replace PCB if both pass test.

Washing Machine

E62

Electrolux

Overheating, check water inlet hose connection, replace temperature sensor if needed.

Washing Machine

EC1

Electrolux

Water inlet flow fault, replace water inlet valves, replace main PCB if needed.

Washing Machine

EF1

Electrolux

Drain fault, check drain pump filter and hoses for blockages.

Washing Machine

EF2

Electrolux

Too much foam, check drain pump and reduce detergent usage.

Washing Machine

EF4

Electrolux

Flow meter not detecting water flow - Check if water faucet is turned on and hoses don't have any kinks or blockages. Replace water inlet valves if necessary.

Washing Machine

EF5

Electrolux

Washing machine out of balance - Rearrange laundry and untangle any tangled up items in the wash basket.

Washing Machine

E64, E65

Electrolux

High limit thermostat tripped open too many times.

Dryer

E66

Electrolux

Thermal limiter tripped.

Dryer

E67

Electrolux

Heating sensor failure.

Dryer

E71 or E72

Electrolux

Outlet thermistor failure.

Dryer

E73

Electrolux

Inlet thermistor failure.

Dryer

E74

Electrolux

Drive motor relay failure.

Dryer

E91

Electrolux

Error with communication.

Dryer

E92

Electrolux

Compatibility issue between user interface control and electronic control board.

Dryer

E93

Electrolux

Machine configuration error.

Dryer

E94

Electrolux

Cycle configuration error.

Dryer

E97

Electrolux

Program mismatch.

Dryer

EA1

Electrolux

Incoming power frequency out of limits.

Dryer

EA2

Electrolux

Incoming line voltage is too high.

Dryer

EA3

Electrolux

Incoming line voltage is too low.

Dryer

EA4

Electrolux

Improper wiring on the terminal block.

Dryer

EA5

Electrolux

Defective electronic control board.

Dryer

EF1

Electrolux

Blocked exhaust vent.

Dryer

EF3

Electrolux

Maximum dry time has expired.

Dryer

EF8

Electrolux

User interface control stuck key.

Dryer

F10

Electrolux

The oven is overheating and the relay board or display board needs to be replaced.

Oven

F11

Electrolux

The keyboard has been pressed for too long and it needs to be replaced.

Oven

F13

Electrolux

The internal checksum of the control has been corrupted and the display board needs to be replaced.

Oven

F14

Electrolux

The keyboard cable is not connected properly and the touch panel needs to be replaced.

Oven

F15

Electrolux

The controller failed its own check and the display board may need to be replaced.

Oven

F23

Electrolux

The oven lights control board is not connected properly and needs to be replaced.

Oven

F30

Electrolux

The RTD sensor probe has gone bad and needs to be replaced.

Oven

F31

Electrolux

The RTD sensor probe has been shorted and the display board needs to be replaced.

Oven

F31

Electrolux

The RTD sensor probe has been shorted and the display board needs to be replaced.

Oven

F43

Electrolux

The cooling fan speed is abnormally slow.

Oven

F44

Electrolux

The cooling fan speed is abnormally fast.

Oven

F90

Electrolux

The door motor mechanism has failed and the wiring needs to be checked.

Oven

C3

Electrolux

The cleaning function is not working because the door is not closed properly or the door lock is defective.

Oven

Demo

Electrolux

The demo mode is activated and needs to be deactivated.

Oven

F

Electrolux

The oven control has detected a fault or error condition and needs to be reset.

Oven

Efun

Electrolux

The fan needs to be reset.

Oven

2

Electrolux

Left front element Down key is defective.

Stove

3

Electrolux

Left front element Up key is defective.

Stove

4

Electrolux

Left front element On/Off key is defective.

Stove

6

Electrolux

Left rear element Down key is defective.

Stove

7

Electrolux

Left rear element Up key is defective.

Stove

8

Electrolux

Left rear element On/Off key is defective.

Stove

10

Electrolux

Right rear element Down key is defective.

Stove

11

Electrolux

Right rear element Up key is defective.

Stove

12

Electrolux

Right rear element On/Off key is defective.

Stove

14

Electrolux

Right front element Down key is defective.

Stove

15

Electrolux

Right front element Up key is defective.

Stove

16

Electrolux

Right front element On/Off key is defective.

Stove

21

Electrolux

Timer Down key is defective.

Stove

22

Electrolux

Timer Up key is defective.

Stove

23

Electrolux

Warm (Keep Warm) key is defective.

Stove

24

Electrolux

Lock key is defective.

Stove

25

Electrolux

Power (Main Power) key is defective.

Stove

30

Electrolux

Improper power supply (high voltage) or internal wiring failure.

Stove

31

Electrolux

Power Level Failure.

Stove

32

Electrolux

Low voltage output from the 12-volt power supply on the filter control board.

Stove

33

Electrolux

Improper voltage output from the filter control board.

Stove

34

Electrolux

Communication failure between the filter control board and the main power control board.

Stove

35

Electrolux

Improper power supply voltage (low voltage) or failed wiring connections.

Stove

36

Electrolux

Communication error between the main power control board and the filter control board.

Stove

39

Electrolux

Touch control board software incompatible with the filter control board after a new touch control board is installed.

Stove

40

Electrolux

Communication error between the main power control board and the filter control board.

Stove

51, 52, 53, 54

Electrolux

Temperature sensor failure on the respective burner.

Stove

E-24

Electrolux

The oven got too hot and had to turn off.

Microwave

E-22

Electrolux

The heat sensor was short circuiting.

Microwave

E-21

Electrolux

The heat sensor was not working properly.

Microwave

E-03

Electrolux

The oven did not heat up fast enough.

Microwave

E-23

Electrolux

The pre-heat setting was not reached in time.

Microwave

-SE-

Electrolux

The keys are shorting out.

Microwave

E-11

Electrolux

The gas sensor was not working.

Microwave

E-12

Electrolux

The gas sensor had an electrical problem.

Microwave

H04

Electrolux

Unplug the machine, clean up coffee powder around the flipper and then start the machine.

Coffee machine

U12

Electrolux

Press cancel button to return to standby mode, re-clamp bean box correctly and then start the machine again.

Coffee machine

CALC

Electrolux

Descaling cycle should be performed regularly to maintain a good coffee and the longevity of your brewer. Descaling done or not, simply press any button to cancel "CALC".

Coffee machine

Electrolux Appliance Error Codes FAQ

What does an Electrolux appliance error code indicate?

> An Electrolux appliance error code is a series of letters or numbers displayed on your Electrolux appliance, which signals a specific problem or malfunction with the machine.

Why is it important to know about Electrolux appliance error codes?

> Understanding Electrolux appliance error codes can help you quickly diagnose and resolve issues with your appliance, thus saving you time and money.

How can I find the error code for my Electrolux appliance?

> The error code for your Electrolux appliance may be displayed on the machine itself, in the user manual, or you can search for it in our directory of Electrolux appliance error codes.

What does the error code mean and how can I fix the problem?

> The meaning of the error code and how to resolve the issue can be found in our directory of Electrolux appliance error codes. Simply search for the code to find a brief and easy-to-understand explanation of the problem and its solution.

Need Help with Your Appliance?

If you're having trouble resolving an error code, or if you'd rather leave the repairs to the experts, our directory of appliance repair technicians is here to help. Find a trusted professional near you to get your appliance back in working order.

Find a Technician